Conductivity probe
DO probe
DISSOLVED OXYGEN PROBE (FLUORESCENT MEMBRANE) Dissolved Oxygen probe based on fluorenscence quenching principle measurement
- Optical technology: low maintenance and high efficiency
- PT100 Temperature compensation
- No flow needed – measurement possible in still water
- Response time: T90: 60 sec. approx.
ECL
OPEN AMPEROMETRIC CELLS For free chlorine (organic and inorganic)
ECL Series is designed for measuring free chlorine (both organic and inorganic). Open amperometric cells comprise an Off-line probe holders, a sensing electrode and a flow electrode. Probe holders can contain up to three probes (temperature, pH and ORP).
ORP Probe
EMEC ORP electrodes assures long-time stability and accuracy. Easy-maintenance electrodes provides accurate reading value and fast response, performances required for the most accurate measurements. Single and double junction models are available. ORP electrodes double junction models only are suitable for sea-water. Double junction system offers better electrode protection and guarantees a longer service life. Choose double junction models if you are working with materials like sulphide, sulfur and silver.
PH Probe
Features Emec Ph Electrodes Assures Long-Time Stability And Accuracy. Ph Easy-Maintenance Electrodes Provides Accurate Reading Value And Fast Response, Performances Required For The Most Accurate Measurements. Single And Double Junction Models Are Available. Ph Electrodes Double Junction Models Only Are Suitable For Sea-Water. Double Junction System Offers Better Electrode Protection And Guarantees A Longer Service Life. Choose Double Junction Models If You Are Working With Materials Like Sulphide, Sulfur And Silver.
SCL
- Chlorine probes for chlorine and chlorine bioxide measurement.
- Stables and reliables measurement even for low chlorine concentration.
- Low pH dependency for chlorine bioxide measurement
Turbidity Probe
TURBIDITY Turbidity is the measurement of water clarity. Suspended sediments, such as particles of clay, soil and silt, frequently enter the water from disturbed sites and affect water quality. Suspended sediments can contain pollutants such as phosphorus, pesticides, or heavy metals. Suspended particles cut down on the depth of light penetration through the water, hence they increase the turbidity — or „murkiness“ or „cloudiness“ — of the water. ETORB2 is a turbidity probe made to operate out-of-the-box. Installer doesn‘t need any setup or calibration, just connect it to the controller.
- Turbidity measurement system according to the 90° scattered light method
- Self-cleaning
- Inclined plain sensor surface
- Factory calibrated (”plug and play”)
- Cable/connector 5 m (ETORB2), 10 m (ETORB2-IM)