We offer a range of dosing pump containing IP 65 enclosure results in longer life and durability in water splashes & Environmental changes. PVDF head, valves & accessories offer more resistance to chemicals and can with stand wide range of environment changes (-10°C to 45°C). All metering pumps come with CE / UL / WQA certification.
Available range of chemical dosing pump:-
- 2 LPH to 1000 LPH
- Pumps available for viscous liquid too (up to 50000 cPs)
- Pumps available for 4 LPH @ 100 bar
- Pumps available for AUTO pH correction, AUTO ORP etc.
- Controllers for chemical dosing pumps and systems.
Multiple digital controller system for managing up to 5 channels that can be programmed to control :-
- PH
- ORP (ORP)
- Chlorine (total, free and combined)
- Chlorine Dioxide
- Hydrogen Peroxide
- Ozone
- Peracetic acid
- Turbidity
- Conductivity
- Dissolved oxygen
- Temperature (on all models, regardless of the configuration)
Panel instruments/ Probes/ Controller (EMEC MAKE (MADE IN ITALY)) :-
- Open Amperometric cells;
- Closed Amperometric cells
- Dissolved oxygen probes;
- Turbidity probe;
- Single-channel inline fluorometer;
- Fluoride ion selective electrode
- pH probe/ Controller
- ORP probe/ Controller
- Conductivity probe/ Controller
- High linearity conductivity probes
- Conductivity probes with graphite Electrodes
- Conductivity probes with SS Electrodes
- SS conductivity probes
- Inductive conductivity probe
- Temperature probes
- Wattman water Flow meter
Panel instruments/ Probes/ Controller (EMEC MAKE (MADE IN ITALY)) :-
Feature :-
- MF :- Digital multifunction pump (Constant, Divide, Multiply, PPM, Batch, Volt, mA, %, ml/q) , stand-by and flow sensor input, alarm output and level control. Recovery fault mode, work-pause mode and upkeep mode.
- ML :- Proportional pump for free chlorine (Cl2) control (from 0 to 10,00 mg/l) with level control, supplied without chlorine probe. It operates with chlorine cells mod. ECL1 and ECL6/7/12 (not provided).
- EN :- Pump with weekly timer, microprocessor, digital controls, LCD display, level probe and electro valve control.
- DC :- Digital constant pump, stand-by input and alarm output and level control.
- PH :- Constant & Proportional pump driven by internal built-in pH meter (0-14 pH) and level control, supplied without pH probe.
- RH :- Constant & Proportional pump driven by internal built-in ORP meter (0-1000 mV) and level control, supplied without ORP probe.
- AC :- Total compressed air driven metering pump with pneumatic stroke frequency adjustment.
- A :- Self Venting series Metering Pumps
- CO :- Constant pump with stroke speed (frequency) adjustment and a divider mode to reduce by 10 times the pump capacity.
- CL :- Constant pump with level control, stroke speed (frequency) adjustment and a divider mode to reduce by 10 times the pump capacity.
PO:- pH or ORP control and regulation (Constant & Proportional Dosing):-
parameter set by menu.
- Fast calibration on standard value.
- Restore last calibration saved.
- Alarm output N.O. / N.C.
- Programmable delay at dosing start up.
- Stand-by input.
- Optional level alarm output.
PLUS:- Constant proportional pump with level control.
Working mode:
- constant – constant with divider (1/10)
- pulse divider (1/10; 10/100; 100/1000)
- pulse multiplier (1/10)
- mA signal current (0/4 mA = 0 pulses: 20mA = max pulses)
- LPV :- Perfect solution for high-dosage need with viscous liquids (up to 50,000 cPs).
- IS :- Constant-proportional pump driven by external digital signal, with level control: to each external pulse corresponds one pump stroke.
- PV :- Constant-proportional pump driven by external digital signal, with pulse divider mode (ratio 1 to 1000) and level control.
- PVM :- Constant-proportional pump driven by external digital signal, level control, with pulse divider mode (ratio 1 to 100) and ultiplier mode (ratio 1 to 10).
- IC :- Constant-proportional pump driven by current signal (0/4mA=0 pulses; 20mA=max pulses) and level control.