Auto Dosing pump is proportional dosing pump with level control.
It is driven by internal built-in pH or Redox (ORP) meter (electrode not included with standard scope of supply).
RANGES
- pH: 0 – 14 pH
- ORP: -999mV – +999mV
FEATURES
- Select pH or ORP parameter by menu: choose MODE and set pH or ORP.
- In both modes, the pump can be set to dose in on / off or proportional.
- In On / Off mode, the pump operates in two values (set-point)
- In proportional mode the pump doses proportionally into the set point.
FAST CALIBRATION
- You can performa a fast calibration on standard value.
- 7.0 and 4.0 for pH, 650 mV for ORP. For different value proceed to a full calibration.
RESTORE LAST CALIBRATION
- If an error occur during calibration you can restore last calibration saved.
ALARMS
- Dosing, reading (probe failure), level and stand-by.
- Alarm output status: N.O. or N.C.
DELAY
- Programmable delay at dosing start up.
RESTORE FACTORY
- Restore factory value (default value).
PASSWORD AND LANGUAGE
- Settable password and language (EN or FR).
STAND-BY
- Stand-by INPUT. (default N.O:)
Verify Chemical Compatibility Of Pump Head, O-Ring And Hoses Before Use.
